Units for position and length
The print positions may be specified in either inch or metric system. Switching between the two systems is accomplished through software.
The print positions can be freely designated within the maximum label size, regardless of which system you use.
Inch system
Basic unit (point): 0.01 in (0.254 mm)
The position of each row address (in the direction of main scanning) and column address (in the direction of subscanning) is designated in
1 point | = | 0.01 in | .=. | 2 dots |
100 point | = | 1.00 in | . | 203 dots |
=. |
Metric system
TThe basic unit is common to all label format and system
Basic unit (point): 0.1 mm
The position of each row address and column address is designated in
T | 1 point | = | 0.1 mm | . | 1 dot |
=. | |||||
100 point | = | 10.0 mm | . | 80 dots | |
| =. |