Citizen Systems CLP-6001 LCD/LED Indications and Adjustment Controls, Normal Operating Mode

2.2LCD/LED Indications and Adjustment Controls

1LCD

The eight-character LCD screen displays the current printer status, configuration settings, or an error message.

2LEDs

Power: The green LED power indicator goes on when the power is tuned ON.

Error: The red LED error indicator goes on when an error occurs.

3Adjustment controls

The three adjustment controls are used to adjust the paper gap (transparent type) sensor sensitivity, black line (reflective type) sensor sensitivity, and LCD contrast.

2.3Normal Operating Mode

When the power is turned on, the printer enters normal operating mode.

The control keys function as follows:

Pause key

Temporarily pauses printing. "Pause" is displayed on the LCD screen.

If pressed during printing, printing will stop after the current label is printed. Press the Pause key again to resume printing.

Feed key

Advance to the top of the next label. When using continuous paper, make

Tsure the Sensor selection is set to ContinuP or a Paper error will result.

Stop key

With this key, the operator can stop and cancel the current print job. Pressing the Stop key during printing stops the printing immediately. Pressing the Stop key again cancels the print job.

2-3