Citizen Systems CLP-6002, CLP-6001 user manual

Indication	Description	Corrective actions
RibonOut	Ribbon end	Check the contents and clear with the Stop
		key.
		Install the ribbon.
		Check that the ribbon winds fully.
		Correct the faulty setting of the print mode
		(direct-thermal or thermal-transfer).
OverHeat	PCB overheat	Turn off the power and reset the printer.
		If this recurs, contact our service personnel.
Fan stop	Fan stop	Check for the fan stop caused by the problems
		such as foreign matter entered in the air vent.
		Automatically returned if the fan turns again.
		If disassembling is needed to remove foreign
		matter or the problem can't be identified,
		contact our service personnel.
OP Err	Option board	Turn off the power and reset the printer.
	abnormality	If this recurs, contact our service personnel.
Cut Err	Auto-cutter	Check the contents and clear with the Stop
	abnormality (such as	key.
	poor engagement)	If this can't be cleared, turn off the power and
		remove foreign matter from the auto-cutter.
		If this recurs, contact our service personnel.
ROM Err	ROM checksum error	Turn off the power and reset the printer.
		If this recurs, contact our service personnel.
RAM Err	RAM checksum error	Turn off the power and reset the printer.
		If this recurs, contact our service personnel.
− −	System error (such as	First protect the system, then reset the printer.
	timer or CPU
	malfunction)

4-6