Citizen CMP-10 manual Esc +, ESC n, Hex Type

ESC +

[Function]	Switch OFF the printer
[Code]	<1B>H<2B>H
[Range]	None
[Outline]	This command is used for switching off the printer from the host.
	Sending this command causes the same operation as that by setting the power switch
	to off.

ESC – n

[Function]	Specifying/ Canceling Underline
[Code]	<1B>H<2D>H<n>
[Range]	{0 =< n =< 02(Hex)}
[Outline]	Specifying/canceling an underline.
	•	Types of underlines by n value are shown below:
		n (Hex)	Type
		0	Canceling an underline.
		1	Specifying an underline for 1-dot width.
		2	Specifying an underline for 2-dots width.
[Caution]	•	An underline is attached to the full character width. It is, however, not attached to
		the part having been skipped by horizontal tab command.
	•	An underline is not attached to a 90°- right-turned characters.
[Default]	n = 0
[See Also]	ESC !
[Sample Program]

PRINT #1, CHR$ (&H1B) + “–” + CHR$ (0);

PRINT #1, “AAAAA” ;

PRINT #1, CHR$ (&H1B) + “–” + CHR$ (1);

PRINT #1, “AAAAA” + CHR$ (&HA);

[Print Results]

Underline Canceled

> >

A A A A A A A A A A

> >

Underline Specified

— 17 —