Citizen CMP-10 manual GS H n, Hex Printing Position

GS H n

[Function]	Selecting of Printing Position of HRI Code
[Code]	<1D>H<48>H<n>
[Range]	{0 =< n =< 3(Hex)}
[Outline]	Selecting printing position of HRI code in printing bar codes.
	• “n” means the followings.
	n (Hex)	Printing Position
	0	No printing
	1	Above the bar code
	2	Below the bar code
	3	Both above and below the bar code
	The HRI code refers to the bar code-turned characters so that you can read them.
[Caution]	The HRI code is printed in the font selected with GS f. Specify before the GS k
	command.
[Default]	The initial value of n is “0”.
[See Also]	GS f

[Sample Program]

PRINT #1, CHR$ (&H1B) + “3” + CHR$ (5);

PRINT #1, CHR$ (&H1D) + “h” + CHR$ (50);

PRINT #1, CHR$ (&H1D) + “H” + CHR$ (0);

GOSUB BC

PRINT #1, CHR$ (&H1D) + “H” + CHR$ (1);

GOSUB BC

PRINT #1, CHR$ (&H1D) + “H” + CHR$ (2);

GOSUB BC

PRINT #1, CHR$ (&H1D) + “H” + CHR$ (3);

GOSUB BC

END

BC:

PRINT #1, CHR$ (&H1D) + “k”;

PRINT #1, CHR$ (4);

PRINT #1, “12” + CHR$ (0);

PRINT #1, CHR$ (&HA);

RETURN

[Print Results]

No Visible Code

Printed above

Printed below

Printed above and below

— 46 —