Citizen CMP-10 manual ESC V n, Hex Condition

Page 31

ESC V n

[Function]	Specifying/Canceling 90°-right- turned Characters
[Code]	<1B>H<56>H<n>
[Range]	{0 =< n =< 1(Hex)}
[Outline]	Specifying/canceling characters 90°-right- turned character.
	“n” means the followings.

	n (Hex)	Condition

0Canceling 90°-right- turned Characters

1 Specifying 90°-right- turned Characters

[Caution]	No underlines are attached to 90°-right- turned characters.
[Default]	The initial value of n is “0”.
[Sample Program]
	PRINT #1, CHR$ (&H1B) + “V” + CHR$ (0);
	PRINT #1, “AAAAA”;
	PRINT #1, CHR$ (&H1B) + “V” + CHR$ (1);
	PRINT #1, “AAAAA” + CHR$ (&HA);
[Print Results]

90° Rotation Canceled

>	>
A A A A A A A A A
	>
	90° Rotation

A >

Specified

— 29 —

Image 31

Contents Command Reference Revision Code Command Function CMP-10 Command SETGS H Xxxx ALL Command DetailsBEL Print Results Sample Program0AH ESC RS ESC SP n Default Sample ProgramESC ! n Default See AlsoBit Function Value END ESC $ n1 n2 ESC % n ESC & m n1 n2 d k Initialize commandESC * m n1 n2 d k Hex Mode Vertical Direction Horizontal Direction DotsMax. Dots IMG1 Page ESC n ESC +Hex Type ESC ESC 3 n Bit Equipment Value ESC = nESC n Hex Track ESC ? nESC @ See Also Sample Program Print Results ESC D n k NULESC E n ESC G n ESC R n ESC J nHex Character Set Model CMP-10 Ver ESC S nESC T Hex Speed bpsHex Condition ESC V nESC Y n Byte ESC ZUpdate via firmware interface Not in use Reserved, always Byte ESC \ n1 n2 ESC ` Hex Position ESC a nESC c5 n ESC d n ESC ESC x n Default Initial value of n is Sample Program GS n m Memory Switch OFFSee Also Sample Program GS * n1 n2 d n1 n2 D1 ...... DnHex Name Dot Density Vertical Direction Horizontal Direction GS / m1DH3AH Hex Printing Position GS H nGS L nL nH GS W n NL = 40 Hex, nH = 2 Hex GS n1 n2 n3 Hex ModeBit Status Item Addressed by ABS GS a nNot in use Thermal head is overheated Disabled for ASB may also have changed Hex Font GS f n1DH68Hn Bar code system Range of k Range of d GS k m d1 ..... dk NUL GS k m n d1 ...... dnBar code system Range of n Range of d For For Standard ModeDescription of Bar Codes JAN-8EAN Code set a Code set B Code set C HexDescriptionof Bar Codes Type Print Sample Outline of Symbol Max. ColumnGS w nL nH ESC l n Black Mark FunctionDistance from PE sensor and print head is approx .5 mm Character Codes Table Programming Considerations Serial Interface Pin No Signal Direction Function Pin No. of Cable14, 15 pin Communicate mode setting Explanation of Input/Output SignalsRS-232C Circuit Electrical CharacteristicsIrComm 3 Wire raw IrLPT Infrared Communication SpecificationsPrinter Mechanism Mechanical SpecificationBattery Power Related SpecificationsEMI Standard AC Adaptor