Citizen CMP-10 manual ESC = n, Bit Equipment Value

ESC = n

[Function]	Data Input Control
[Code]	<1B>H<3D>H<n>
[Range]	{0 =< n =< FF(Hex)}
[Outline]	Selecting equipment in which data input from the host is effective.
	• Each bit of n indicates as follows:
		Bit	Equipment	Value
				0	1
		0	Printer	Invalid	Valid
		1	Not defined
		2	Not defined
		3	Not defined
		4	Not defined
		5	Not defined
		6	Not defined
		7	Not defined

•When the printer has not been selected, this printer abandons all the received data until it is selected by this command.

[Caution]	• Even when the printer has not been selected, it can become BUSY state through
	printer operation.
	• When the printer is deselected, this printer discards all the data until it is selected
	with this command.
[Default]	The initial value of n is “1”.
[Sample Program]
	PRINT #1, “AAAAA”;
	PRINT #1, CHR$ (&H1B) + “=” + CHR$ (0);
	PRINT #1, “aaaaa” + CHR$ (&HA);
	PRINT #1, CHR$ (&H1B) + “=” + CHR$ (1);
	PRINT #1, “AAAAA” + CHR$ (&HA);
[Print Results]
	A A A A A A A A A A
	>
	a a a a a

— 20 —