Citizen CMP-10 manual ESC a n, Hex Position

ESC a n

[Function]	Aligning the characters
[Code]	<1B>H<61>H<n>
[Range]	{0 =< n =< 2(Hex)}
[Outline]	All the printed data within one line are aligned in the specified position.
	Depending on n value, positional alignment is carried out as in the table below:
	n (Hex)	Position
	0	Left end alignment
	1	Centering
	2	Right end alignment
[Caution]	• This is valid only when n is inputted at the beginning of line.
	• The initial value of n is “0”.

[Sample Program]

PRINT #1, CHR$ (&H1B) + “a” + CHR$ (0);

PRINT #1, “AAAAA” + CHR$ (&HA);

PRINT #1, CHR$ (&H1B) + “a” + CHR$ (1);

PRINT #1, “AAAAA” + CHR$ (&HA);

PRINT #1, CHR$ (&H1B) + “a” + CHR$ (2);

PRINT #1, “AAAAA” + CHR$ (&HA);

[Print Results]

A A A A A			>
	A A A A A
		A A A A A	Paper Feed
			Direction
Left-justified	Centered	Righ-justified

— 36 —