Citizen CMP-10 manual GS a n, Bit Status Item Addressed by ABS

Page 53

GS a n

[Function]	Enabling/Disabling ASB (Automatic Status Back)
[Code]	<1D>H<61>H<n>
[Range]	{0 =< n=< FF(Hex)}
[Outline]	This command selects the status item to be addressed by ASB (Automatic Status
	Back.)

	Bit	Status Item Addressed by ABS
	0	Not defined
	1	Defining LF button function
	2	Thermal head temperature status
	3	Paper end sensor and paper cover open status
	4	Not defined
	5	Not defined
	6	Not defined
	7	Not defined

When this command is executed, the printer will return 4 bytes with status information, with the follwoing meaning:

BYTE 1

BIT7

BIT6

BIT5

BIT4

BIT3

BIT2

BIT1

BIT0

Not in use (0)

Not in use (0)

Not in use (0)

Not in use (0)

Not in use (1)

Not in use (0)

The paper is fed manually by LF switch

Not in use (0)

— 51 —

Image 53

Contents Command Reference Revision Code Command Function CMP-10 Command SETGS H Xxxx ALL Command DetailsBEL Print Results Sample Program0AH ESC RS ESC SP n Default Sample ProgramBit Function Value Default See AlsoESC ! n END ESC $ n1 n2 ESC % n ESC & m n1 n2 d k Initialize commandMax. Dots Hex Mode Vertical Direction Horizontal Direction DotsESC * m n1 n2 d k IMG1 Page Hex Type ESC +ESC n ESC ESC 3 n Bit Equipment Value ESC = nESC n Hex Track ESC ? nESC @ See Also Sample Program Print Results ESC D n k NULESC E n ESC G n Hex Character Set ESC J nESC R n ESC T ESC S nHex Speed bps Model CMP-10 VerHex Condition ESC V nESC Y n Byte ESC ZUpdate via firmware interface Not in use Reserved, always Byte ESC \ n1 n2 ESC ` Hex Position ESC a nESC c5 n ESC d n ESC ESC x n Default Initial value of n is Sample Program GS n m Memory Switch OFFSee Also Sample Program GS * n1 n2 d n1 n2 D1 ...... DnHex Name Dot Density Vertical Direction Horizontal Direction GS / m1DH3AH Hex Printing Position GS H nGS L nL nH GS W n NL = 40 Hex, nH = 2 Hex GS n1 n2 n3 Hex ModeBit Status Item Addressed by ABS GS a nNot in use Thermal head is overheated Disabled for ASB may also have changed Hex Font GS f n1DH68Hn Bar code system Range of n Range of d GS k m d1 ..... dk NUL GS k m n d1 ...... dnBar code system Range of k Range of d Description of Bar Codes For Standard ModeFor JAN-8EAN Code set a Code set B Code set C HexDescriptionof Bar Codes Type Print Sample Outline of Symbol Max. ColumnGS w nL nH ESC l n Black Mark FunctionDistance from PE sensor and print head is approx .5 mm Character Codes Table Programming Considerations Serial Interface Pin No Signal Direction Function Pin No. of Cable14, 15 pin Communicate mode setting Explanation of Input/Output SignalsRS-232C Circuit Electrical CharacteristicsIrComm 3 Wire raw IrLPT Infrared Communication SpecificationsPrinter Mechanism Mechanical SpecificationBattery Power Related SpecificationsEMI Standard AC Adaptor