Citizen CMP-10 manual ESC \ n1 n2, Function

ESC \ n1 n2

[Function]	Specifying the relative positions
[Code]	<1B>H<5C>H<n1><n2>
[Range]	{0 =< n1 =< 255}
	{0 =< n2 =< 255}
[Outline]	The printing start position is specified in the number of dots (1/203 inch unit) from
	the current position.
	•	Rightward direction is taken as plus and leftward direction as minus.
	•	To specify N dot in minus (left) direction, use a complement of N for assignment.
	•	N dots = 65536 – N
	•	The number of dots is divided by 256, whose quotient is taken as n2 and the residual
		as n1.
[Caution]	Specifying exceeding the top of line or the end of line is ignored.
[See Also]	ESC $
[Sample Program]	See Sample Program and Print Results for ESC $.

ESC _

[Function]	Setting the printer in default state
[Code]	<1B>H<5F>H
[Outline]	Sets the printer in default state. The default state is as follows:
	•	All printing attributes like underline, rotating etc. are cleared.
	•	Internal font A (12 ⋅ 24) is selected.
	•	Pitch between lines is 1/6 inch.
	•	Pitch between characters is 0.
	•	Barcode height is 162 dots, and barcode width is 3.
	•	All downloaded fonts and bit images are cleared.
	•	Print density is 100%.
	•	Communication speed is set to 9600 bps.
	•	Auto power-off time is set at 5 min.
	• Memory switch is set to “all 0”.
[See Also]	ESC @

— 34 —