Johnson Controls XT-9100, XP-910x appendix Digital Input Configuration

Page 15

Digital Input Configuration

DI: Input Type

An XT-9100 can accept up to 16 digital inputs, which will be considered active when driven to a common digital ground. The first eight digital inputs are connected to XP1 and the next eight digital inputs to XP2.

Each digital input is defined and configured by the following parameters:

∙Tag name (optional, GX-9100 only)

∙Input type

∙Counter prescaler

Inputs may be defined as maintained or pulse type. With maintained type contacts the extension module status follows the status of the contact. With pulse type contacts the extension module sets and resets the status at each pulse of the input contact.

Via the GX Tool

Select XTn (or EXP), DIn, then Data. At the “Digital Input Type” field enter 0 for maintained contact or 1 for pulse contact.

Via the SX Tool

The input type for the 2 x 8 possible inputs can be configured in Item DIT1 for XP1 (RI.64) and in Item DIT2 (RI.65) for XP2, bits X1-X8 for

D11-DI8, as follows:

0 = Maintained Contact

1 = Pulse Contact

Configuration Guides—XT-9100 Configuration Guide 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents XT-9100 Configuration Guide Configuration Guides-XT-9100 Configuration Guide Introduction XT-9100 Extension Module XP-910x Expansion ModulesXT/XP/TR Model Codes Hardware Configuration Model CodesTypical XT-9100 Configuration XT Configurations Configuration Guides-XT-9100 Configuration Guide XT-9100 Type Settings Software ConfigurationVia SX Tool XT-9100 Configuration Analog Input Via the GX Tool Option Only Available with Active Sensor AI Input Type Input Signal Range AI Input Type Alarm Limits Filter Time Constant AI Notes Digital Input Configuration RI.09 Analog Output ConfigurationAO Output Type Via the GX Tool AO Source With DX-9100 Only AO Notes Digital Output Configuration Do Source With DX-9100 Only Do Notes Download/ Upload Upload via a DX-9100 Controller General Item Address Item Type Appendix 1 SX Tool Item Description and TablesItem Tag Read/Write Data R/W Mmmmmmmmmmm Floating Point Numbers Item ListPWR ModlOpmo FailDOS1 DOS2DIS1 AIL1 DIS2AIS AIH1AI4 AI1AI2 AI3CNF PC4 CNF PC1CNF PC2 CNF PC3CNF DOT1 CNF DIT2CNF CNF DOT2CNF Dopt CNF XTSCNF Iotyp CNF IomapXP1 XP2CNF Iomod CNF MtbcCNF AOT HIA1 CNF AIT1CNF HR1 CNF LR1HIA3 CNF AIT3CNF HR3 CNF LR3HIA6 CNF AIT6CNF HR6 CNF LR6Configuration Guides-XT-9100 Configuration Guide Configuration Guides-XT-9100 Configuration Guide Controls Group FAN
Top Page Image Contents