6030 Operator’s Handbook
12.Hold the supply edge between the feed and pinch rollers. Press the trigger to feed the backing paper through the rollers.
Feed
Roller
Pinch
Roller
13.Press 1 if you are loading the same supply type. Press e to start your application. Or, press 2 to load a different supply type or size. You will see:
Supply Type?
1 = Synthetic
14.Press e if this is the correct supply type.
To change the supply type, use the arrow keys to scroll to the correct supply type and then press e.
1 = High (recommended for synthetic supplies)
2 = Low (default - recommended for paper supplies)
nDo not select Supply Types 3 or 4 since they require different loading methods.