Monarch 6030TM manual Selecting Bar Codes for Scanning, Msi

Page 46

6030 Operator’s Handbook

Selecting Bar Codes for Scanning –––––––––––––––––––––––––––––

You must enable and disable each specific bar code type for scanning. You can scan any bar code listed below.

UPC/EAN	CODABAR	LAC CODE39	Code 128
I2of5	MSI	MaxiCode

nF You must select 1 check digit or 2 check digits for MSI bar codes.

FYou must enable or disable function codes for Code 128 bar codes.

FYou must enable or disable supplements for UPC/EAN bar codes.

To enable or disable a bar code for scanning:

1.From the CONFIG. MENU, press > until you see:

Shutdown Timer

Scanner

2.Press e. You will see:

SCANNER MENU

UPC/EAN

3.Press e. You will see:

UPC/EAN

Enable

nWhen UPC/EAN is enabled, you can scan UPCA, UPCE, EAN8, EAN13, or LAC bar codes.

6-6

Image 46

Contents Operator’s Handbook Canadian D.O.C. Warning Laser Scanner Safety Information Page Preface Terms to KnowContinuous Chapter Introduction Using Command Mode Using the Menus Main MenuOperator’s Handbook Using the Battery Handle Chapter Getting StartedWhen to Charge the Battery Handle Removing and Attaching the Battery Handle Charging the Battery Handle Chapter Loading Supplies Loading SuppliesLoading for Peel Mode Loading Supplies Label Deflector Applicator Roller Label Deflector Feed Roller Pinch Loading Supplies Loading for Non-Peel Mode Supply Holder Applicator Roller Label Deflector Loading Supplies Removing Supplies About the Display Using the Scroll FeatureEntering and Printing Data Enabling the BacklightUsing the Keypad + a Data Entry ModesUsing Numeric Mode Using Uppercase Alpha ModeUsing Lowercase Alpha Mode Using Special Character ModeFunction Keys Using ApplicationsStarting an Application Start App Printing in On-Demand Mode Resuming an Application Resume AppPrinting in Continuous Mode Connecting the Communications Cable Chapter Transferring DataCommunications Port Mini-DIN Connector Receiving Data WaitingSending Data Setting Communications Parameters NONE, EVEN, ODD*, MARK, Space Configuring the Printer Enabling/Disabling On-Demand Mode Enabling/Disabling the BacklightSetting the Time and Date Selecting a Language Enabling/Disabling the Shutdown Timer Selecting Bar Codes for Scanning MSIDisable Press e to disable the bar code. You will see Operator’s Handbook Care and Maintenance Clearing Supply Jams Care and Maintenance Cleaning the Printhead Cleaning the Platen, Feed and Pinch Rollers Platen Roller Cleaning the Sensors Black Mark Sensor Storage Tips Operator’s Handbook Using the Laser Scanner Scanning a Bar Code Cleaning the Scanner Window Scanning TipsOperator’s Handbook Chapter Troubleshooting Problems and SolutionsIf none of these solutions works, call Service Messages---------------------------------------------------˝ Not Available Chapter Using Diagnostics Checking the Software Version Checking Memory AllocationUsing Diagnostics Checking Machine TotalsPerforming Hardware Tests Printing Tests 10-6 10-7 Label with voids 10-9 Checking the Serial Port Checking the Sensors 10-12 10-13 Checking the Printhead Checking the Battery Testing the Scanner Battery = ###Scanning Checklist Display TestsKeypad Test Motor TestResetting the Application Service DiagnosticsOperator’s Handbook 10-20 Appendix A. Reference Information Cable Pin OutsAnsi Character Table Appendix B. Specifications and Accessories SpecificationsAccessories Supply SizesPage Operator’s Handbook