Monarch 6030TM manual Testing the Scanner, Battery = ###

Page 82

6030 Operator’s Handbook

2.Press e. You will see:

BATTERY = ###

The acceptable operating range is 780-995. However, if a fully charged battery displays an amount below 900, the battery may be losing its recharging capacity. Use another battery, make a note of the number, and call Service.

3.Press b.

Testing the Scanner

The scanner test checks the functionality of the scanner.

nUses scanner setting All. See "Selecting Bar Codes for Scanning" in Chapter 6.

To run the Scanner test:

1.Set the scanner to All. See "Selecting Bar Codes for Scanning" in Chapter 6.

2.From the HDW TEST MENU, press > until you see:

Battery

Scanner

3.Press e you will see SCAN A BARCODE.

4.Aim the scanner at a bar code and press the trigger.

FIf the scan is successful you will see the bar code data on the second line of the display.

FIf the scan is unsuccessful you will see the message NO DATA RECEIVED on the second line of the display.

5.Press b.

10-16

Image 82

Contents Operator’s Handbook Canadian D.O.C. Warning Laser Scanner Safety Information Page Preface Terms to KnowContinuous Chapter Introduction Using Command Mode Using the Menus Main MenuOperator’s Handbook Using the Battery Handle Chapter Getting StartedWhen to Charge the Battery Handle Removing and Attaching the Battery Handle Charging the Battery Handle Chapter Loading Supplies Loading SuppliesLoading for Peel Mode Loading Supplies Label Deflector Applicator Roller Label Deflector Feed Roller Pinch Loading Supplies Loading for Non-Peel Mode Supply Holder Applicator Roller Label Deflector Loading Supplies Removing Supplies About the Display Using the Scroll FeatureEntering and Printing Data Enabling the BacklightUsing the Keypad + a Data Entry ModesUsing Numeric Mode Using Uppercase Alpha ModeUsing Lowercase Alpha Mode Using Special Character ModeFunction Keys Using ApplicationsStarting an Application Start App Printing in On-Demand Mode Resuming an Application Resume AppPrinting in Continuous Mode Connecting the Communications Cable Chapter Transferring DataCommunications Port Mini-DIN Connector Receiving Data WaitingSending Data Setting Communications Parameters NONE, EVEN, ODD*, MARK, Space Configuring the Printer Enabling/Disabling On-Demand Mode Enabling/Disabling the BacklightSetting the Time and Date Selecting a Language Enabling/Disabling the Shutdown Timer Selecting Bar Codes for Scanning MSIDisable Press e to disable the bar code. You will see Operator’s Handbook Care and Maintenance Clearing Supply Jams Care and Maintenance Cleaning the Printhead Cleaning the Platen, Feed and Pinch Rollers Platen Roller Cleaning the Sensors Black Mark Sensor Storage Tips Operator’s Handbook Using the Laser Scanner Scanning a Bar Code Cleaning the Scanner Window Scanning TipsOperator’s Handbook Chapter Troubleshooting Problems and SolutionsIf none of these solutions works, call Service Messages---------------------------------------------------˝ Not Available Chapter Using Diagnostics Checking the Software Version Checking Memory AllocationUsing Diagnostics Checking Machine TotalsPerforming Hardware Tests Printing Tests 10-6 10-7 Label with voids 10-9 Checking the Serial Port Checking the Sensors 10-12 10-13 Checking the Printhead Checking the Battery Testing the Scanner Battery = ###Scanning Checklist Display TestsKeypad Test Motor TestResetting the Application Service DiagnosticsOperator’s Handbook 10-20 Appendix A. Reference Information Cable Pin OutsAnsi Character Table Appendix B. Specifications and Accessories SpecificationsAccessories Supply SizesPage Operator’s Handbook