Chapter 5. Transferring Data
FPress e to send data collection records.
FPress > to select a Lookup Table
Each time you successfully transmit records, you will see TRANSMISSION COMPLETE.
6.When you are finished sending data:
a.Press b until you see the MAIN MENU.
b.Disconnect the cable from the printer.
nMake sure you grasp the connector when removing the communications cable. DO NOT pull on the cord.
Setting Communications Parameters ––––––––––––––––––––––––––
You can use the Serial Port menu in the Command mode to
Fset the communications parameters to match your host.
Fenable/disable the echo of the BEL character.
Fenable/disable ENQ polling (status polling).
To set these parameters:
1.From the MAIN MENU, press > until you see:
Start App.
Data Transfer
2.Press e. You will see:
TRANSFER MENU
Receive