Monarch 6030TM manual Enabling/Disabling On-Demand Mode, Enabling/Disabling the Backlight

Page 42

6030 Operator’s Handbook

Enabling/Disabling the Backlight –––––––––––––––––––––––––––––

The display backlight can be enabled for dimly lit areas. This feature is disabled when you receive the printer.

If there is no activity at the keypad or scanner for a period of time, the backlight shuts off. The backlight turns on when you resume activity. The default for shutdown is 30 seconds.

nContact your System Administrator to see if your application uses this feature.

To enable the backlight:

1.Press e to select Backlight from the CONFIG. MENU. You will see:

Backlight

Disable

2.Press 1 to select Enable or 2 to select Disable.

3.Press e .

Enabling/Disabling On-Demand Mode ––––––––––––––––––––––––

On-Demand mode is a print mode in which one label prints each time you remove the previously printed label.

To enable On-Demand mode:

1.From the CONFIG. MENU, press > until you see:

Backlight

On-Demand

6-2

Image 42

Contents Operator’s Handbook Canadian D.O.C. Warning Laser Scanner Safety Information Page Preface Terms to KnowContinuous Chapter Introduction Using Command Mode Using the Menus Main MenuOperator’s Handbook Using the Battery Handle Chapter Getting StartedWhen to Charge the Battery Handle Removing and Attaching the Battery Handle Charging the Battery Handle Chapter Loading Supplies Loading SuppliesLoading for Peel Mode Loading Supplies Label Deflector Applicator Roller Label Deflector Feed Roller Pinch Loading Supplies Loading for Non-Peel Mode Supply Holder Applicator Roller Label Deflector Loading Supplies Removing Supplies About the Display Using the Scroll FeatureEntering and Printing Data Enabling the BacklightUsing the Keypad + a Data Entry ModesUsing Numeric Mode Using Uppercase Alpha ModeUsing Lowercase Alpha Mode Using Special Character ModeUsing Applications Function KeysStarting an Application Start App Printing in On-Demand Mode Resuming an Application Resume AppPrinting in Continuous Mode Connecting the Communications Cable Chapter Transferring DataCommunications Port Mini-DIN Connector Receiving Data WaitingSending Data Setting Communications Parameters NONE, EVEN, ODD*, MARK, Space Configuring the Printer Enabling/Disabling On-Demand Mode Enabling/Disabling the BacklightSetting the Time and Date Selecting a Language Enabling/Disabling the Shutdown Timer Selecting Bar Codes for Scanning MSIDisable Press e to disable the bar code. You will see Operator’s Handbook Care and Maintenance Clearing Supply Jams Care and Maintenance Cleaning the Printhead Cleaning the Platen, Feed and Pinch Rollers Platen Roller Cleaning the Sensors Black Mark Sensor Storage Tips Operator’s Handbook Using the Laser Scanner Scanning a Bar Code Cleaning the Scanner Window Scanning TipsOperator’s Handbook Chapter Troubleshooting Problems and SolutionsIf none of these solutions works, call Service Messages---------------------------------------------------˝ Not Available Chapter Using Diagnostics Checking the Software Version Checking Memory AllocationUsing Diagnostics Checking Machine TotalsPerforming Hardware Tests Printing Tests 10-6 10-7 Label with voids 10-9 Checking the Serial Port Checking the Sensors 10-12 10-13 Checking the Printhead Checking the Battery Testing the Scanner Battery = ###Scanning Checklist Display TestsKeypad Test Motor TestResetting the Application Service DiagnosticsOperator’s Handbook 10-20 Appendix A. Reference Information Cable Pin OutsAnsi Character Table Appendix B. Specifications and Accessories SpecificationsAccessories Supply SizesPage Operator’s Handbook