Monarch 6030TM manual Cleaning the Printhead

Page 52

6030 Operator’s Handbook

Cleaning the Printhead ––––––––––––––––––––––––––––––––––––––

Clean the printhead

Fafter using 7-10 rolls of supplies.

Fin extreme temperatures, humid conditions or dirty environment.

Fwhen you see voids in the print.

Fafter a supply jam.

cUse isopropyl alcohol on the interior areas only, never on the exterior. DO NOT use silicone to clean or lubricate.

Use any of the following items to clean the printhead:

Fsoft cloth moistened with isopropyl alcohol

FMonarch Cleaning Pen #114226

FMonarch 6076T M Cleaning Kit

cF DO NOT use sharp objects to remove adhesive or label particles from the printhead area. This may damage the printhead and void your warranty.

FAlways ground yourself before cleaning the printhead. This prevents electrostatic discharge.

To clean the printhead:

1.Turn the printer off.

2.Open the supply cover and remove the supply roll.

3.Check the supply holder for adhesive buildup, and clean if necessary.

4.Ground yourself by touching something metal.

7-4

Image 52

Contents Operator’s Handbook Canadian D.O.C. Warning Laser Scanner Safety Information Page Preface Terms to KnowContinuous Chapter Introduction Using Command Mode Using the Menus Main MenuOperator’s Handbook Using the Battery Handle Chapter Getting StartedWhen to Charge the Battery Handle Removing and Attaching the Battery Handle Charging the Battery Handle Chapter Loading Supplies Loading SuppliesLoading for Peel Mode Loading Supplies Label Deflector Applicator Roller Label Deflector Feed Roller Pinch Loading Supplies Loading for Non-Peel Mode Supply Holder Applicator Roller Label Deflector Loading Supplies Removing Supplies Using the Scroll Feature Entering and Printing DataAbout the Display Enabling the BacklightUsing the Keypad + a Data Entry ModesUsing Numeric Mode Using Uppercase Alpha ModeUsing Lowercase Alpha Mode Using Special Character ModeFunction Keys Using ApplicationsStarting an Application Start App Printing in On-Demand Mode Resuming an Application Resume AppPrinting in Continuous Mode Connecting the Communications Cable Chapter Transferring DataCommunications Port Mini-DIN Connector Receiving Data WaitingSending Data Setting Communications Parameters NONE, EVEN, ODD*, MARK, Space Configuring the Printer Enabling/Disabling On-Demand Mode Enabling/Disabling the BacklightSetting the Time and Date Selecting a Language Enabling/Disabling the Shutdown Timer Selecting Bar Codes for Scanning MSIDisable Press e to disable the bar code. You will see Operator’s Handbook Care and Maintenance Clearing Supply Jams Care and Maintenance Cleaning the Printhead Cleaning the Platen, Feed and Pinch Rollers Platen Roller Cleaning the Sensors Black Mark Sensor Storage Tips Operator’s Handbook Using the Laser Scanner Scanning a Bar Code Cleaning the Scanner Window Scanning TipsOperator’s Handbook Chapter Troubleshooting Problems and SolutionsIf none of these solutions works, call Service Messages---------------------------------------------------˝ Not Available Chapter Using Diagnostics Checking the Software Version Checking Memory AllocationUsing Diagnostics Checking Machine TotalsPerforming Hardware Tests Printing Tests 10-6 10-7 Label with voids 10-9 Checking the Serial Port Checking the Sensors 10-12 10-13 Checking the Printhead Checking the Battery Testing the Scanner Battery = ###Scanning Checklist Display TestsKeypad Test Motor TestResetting the Application Service DiagnosticsOperator’s Handbook 10-20 Appendix A. Reference Information Cable Pin OutsAnsi Character Table Appendix B. Specifications and Accessories SpecificationsAccessories Supply SizesPage Operator’s Handbook