5624 Wireless Handset User Guide
Answer a Call
The flashing LED, accompanied by a ring signal and/or a vibrating handset, notifies you of calls. The ring signal and vibrator can be disabled. The calling party’s handset number or name is shown. The name will be shown if the calling party’s handset number is stored in the local phonebook. When a headset is connected to the handset, the answering button on the headset can be used to answer the call.
Other answering methods can be specified in the Settings menu. See the Mitel 5624 Wireless Handset Configuration Guide. The answering methods are Automatically, Loudspeaking, and Quick answer.
When “Automatically” is enabled, all incoming calls are connected automatically.
Answer a Call
When the signal sounds press to answer the call, or press the soft key to answer the call in loudspeaking mode. The name/number of the calling party appears if calling line information is available.
End a Call
1.If necessary, select the call to end by using Up and Down on the Navigation key.
2.Press “End” to end the call. The selected call ends.
3.If needed, press “Rear.” to resume talking with the remaining call.
The duration of the call is shown in the display. The total time of the call can also be retrieved from the Calls menu > Call time.
During a Call
Note: Some of these functions are system dependent. The parameters are set up in PDM. See the Mitel 5624 Wireless Handset Configuration Guide, and the Mitel Portable Device Manager Installation and Maintenance Guide.
Additional
If the handset is configured in PDM you can call a
20