Minolta PCL6 user manual Tips

Properties Settings Chapter 3

3-8

4. Setup tab

(3)Image Repeat

Prints two copies of the same page on one sheet.

•	Off	Default setting
•	2-Repeat	Image Repeat is on.

(4) Paper Source

Selects the machine’s paper take-up tray to be used.

Allows you to set the Cover Page function and the OHP Interleaving function.

• Paper Source	Select the paper take-up tray to be used.
	The available paper sizes are determined by the types
	of paper take-up trays installed in the machine.
	Available settings: Auto, Manual Feed, Tray1 to
		Tray3, LCC
• Media Type	Select the type of paper.
	Setting values:	Plain, Transparency (OHP),
		Thick, Thin, Tab, Trace, and User
		Define
• Detail of Paper Source
	Make settings for the Cover Page function and OHP
	interleaving function. ☞ p. 3-10

NOTE

Some paper sizes cannot be selected. For details, refer to the User Manual of the machine.

TIPS

•Set the paper take-up tray in the Device Options Setting tab.

•The paper take-up tray used is displayed in green in the Printer Figure area.