Minolta PCL6 user manual Troubleshooting Chapter

Troubleshooting Chapter 4

4-6

1. Troubleshooting

Symptom	Possible cause	Action
Unable to specify the	No exit port can be speci-	Check the setting of the paper
exit port	fied if the paper size is A6	size.
	or Custom Size is specified.
Paper is not fed from	Paper will not be fed from	Load the paper source with paper
the specified paper	the specified paper source	of the appropriate size and in the
source.	if that paper source is	appropriate direction.
	loaded with paper of a dif-
	ferent size and orientation.
No watermark is	A watermark may not be	No watermark can be printed in
printed.	printed in graphics applica-	this case.
	tions.
Unable to print	The paper size, paper orien-	Make correct settings in the
exactly as set.	tation, and other settings	application.
	made in the application
	take precedence over those
	made in the driver.

If the problem persists even after these checks have been made, refer to the documentation for the machine.