Minolta PCL6 user manual Tip

3-7

4. Setup tab

NOTES

•If the original document for a print job contains pages of different sizes and/or different orientations, pages may be partially cut or overlap each other.

•This setting is not available if Custom Paper is used.

TIP

The print layout is displayed in the Page Layout area.

(2)Duplex / Booklet

Specifies two-sided printing and booklet printing.

• Off	No setting
• Short Edge Binding	Two-sided printing that allows for the short edge to
	be bound
• Long Edge Binding	Two-sided printing that allows for the long edge to
	be bound
• Booklet Left Binding	Four pages are printed on both sides of a single
	sheet of paper so that when the sheet is folded in the
	middle it forms a left-bound booklet.
• Booklet Right Binding	Four pages are printed on both sides of a single
	sheet of paper so that when the sheet is folded in the
	middle it forms a right-bound booklet.

☞See p. 1-3 for an illustration.

NOTES

•If the original document for a print job contains pages of different sizes and/or different orientations, pages may be partially cut or overlap each other.

•Two-sided printing and OHP Interleaving are not available simultaneously.

TIPS

•Two-sided printing can be performed on paper of the following sizes: Letter, Letter-R, Legal, A3, A4, A4-R, A5, B4, B5, B5-R, Invoice, 11×17, F4-1, F4-2,

F4-3, and F4-4.

•Short Edge Binding, Long Edge Biding, Booklet Left Binding and Booklet Right Binding will be displayed in the Page Layout area.

Properties Settings Chapter 3