Minolta PCL6 user manual Horizontal and Vertical boxes

Properties Settings Chapter 3

3-26

8. Overlay tab

(11)Shading

Specify the density of the characters. Setting range: 5% to 100%

(12)Angle

Specify the angle of the characters with respect to the paper.

• Angle	Default angle fixed by the driver.
	Available settings: Horizontal, Diagonal, Vertical,
		User Setting
• User Setting	If you select “User Setting” from the Angle list, you
	can set any desired angle.
	Setting range:	-180° to +180° (A – (minus)
		value rotates the characters
		clockwise, 0 leaves the characters
		parallel to the paper, and a +

(plus) value rotates the characters counterclockwise.)

(13)Position

Specify the position at which you wish to print a watermark.

• Center	The watermark is printed in the center of the paper.
• User Setting	You can specify a position by entering numbers in the
	Horizontal and Vertical boxes.
	Setting values:
	Horizontal	-999 to 999 points (in 1-point
		steps)
	Vertical	-999 to 999 points (in 1-point
		steps)
		(72 points = 1 inch)

TIPS

•Specify the position from the center. The Horizontal positive direction is to the right, and the Vertical positive direction is upward.

•You can view your settings in the Preview area (1).