Minolta PCL6 user manual Troubleshooting Chapter

		4-5
		1. Troubleshooting
Symptom	Possible cause	Action
Unable to staple	No stapling can be per-	Check the type of paper.
properly.	formed on thick paper or
	OHP transparencies.
	When the Finisher is	Check the number of prints to be
	installed, no stapling can be	made.
	performed if the number of
	prints to be made exceeds
	50.
	No stapling can be per-
	formed if the number of
	pages to be printed is 50 or
	more when a Booklet Fin-
	isher is mounted.
	No stapling can be per-
	formed if the original docu-
	ment contains pages of
	different sizes.
The stapling position	The paper direction and N-	Change the Orientation setting.
is opposite to what is	up do not match the setting
expected.	made for Orientation.
Folding cannot be	The optional Booklet Fin-	Select “Booklet Finisher” in the
specified.	isher is necessary for you to	Device Options Setting tab.
	specify Folding. “Booklet
	Finisher” must be selected
	in the Device Options Set-
	ting tab.
	Folding may be disabled	Check the settings made. (See
	when Staple is specified.	“Function combination matrix”
		on p. A-2.)
Folding is not per-	Folding cannot be per-	Check the type of paper.
formed.	formed if tab paper or OHP
	transparencies are used.
Unable to print an	The machine’s available	Add memory to expand the
image properly.	memory space is not suffi-	machine’s memory space or sim-
	cient.	plify the image to reduce the
		amount of data handled.

Troubleshooting Chapter 4