Minolta PCL6 user manual See p -3 for an illustration

3-15

5. Paper tab

(2)Output Paper Size

Allows you to set the size of the paper on which prints are to be made.

• Output Paper Size	Allows you to specify the size of the printing paper.
• Paper size	Select the size of the printing paper.
	Available settings: Letter, Letter-R, Legal, A3, A4,
		A4-R, A5, A5-R, A6, B4, B5, B5-
		R, Invoice, Invoice-R, 11×17, F4-
		1, F4-2, F4-3, F4-4
• Fit to Paper	The original is printed at a zoom ratio that matches
	the size of the printing paper.
• Scaling	Specify the print zoom ratio.
	Setting range:	25 to 400%

☞See p. 1-3 for an illustration.

NOTES

•If you select a paper size not loaded in the machine, the machine will display a message informing you of this.

•If you specify a paper source and paper size that do not match the specified tray, the machine will display messages showing that the specified paper size is not correct and asking if printing should be executed forcibly.

•If the Original Document Size setting does not match the size specified in the application with “Fit to Paper” selected, the machine will use the paper size set in the application.

(3) Full Bleed

Specify if you want to print the pages with a full bleed.

•	Off	The document is not printed with a full bleed.
•	On	The document is printed with a full bleed.

(4)Wide Paper

Specify if you want to use wide paper.

•	Off	Wide paper is not used.
•	On	Select the size of wide paper used.

Properties Settings Chapter 3