Olivetti P26W, P20W manual EtherTalk, Http

MENU	ITEM	FUNCTION
Setup	Device Setup	Configure the network interface.
	Setup by	Launch the default browser in your
	HTTP	environment to access the selected
		printer’s web page.
	Setup by	Launch TELNET application in your
	TELNET	environment to access the selected
		printer’s TELNET port.
		Note:The TELNET application is not
		included as part of the NIC package.
		Install the TELNET package on to
		your system. For further information,
		see your Windows manual.
Setup	Create	Create a NetWare queue.
	NetWare
	Queue
	Delete	Delete NetWare object.
	NetWare
	Object
	Reset	Reset the selected network interface card.
	Test Print	Print self-diagnostic test pages.
	IP Address	Set static IP address of network interface
	Setup	card manually.

DEVICE SETUP

Device Setup allows you to configure the network interface. Type the root password (default value is the last 6 characters of the MAC address) to configure. Remember that the root password is case sensitive. If the MAC address contains any alpha characters, type them as upper case. Device Setup contains details for the following selectable tabs:

> General	> SNMP
> TCP/IP	> POP
> NetWare	> SMTP
> NetBEUI	> Maintenance

>EtherTalk

Network Configuration> 13