Olivetti P20W, P26W manual Remote Server Mode

Page 89

THE NETWORK INTERFACE IS IDENTIFIED BY THE SETUP UTILITY BUT NOT BY THE NETWARE SERVER

Start up the NetWare server and check the NIC configuration.

Check the NSAP packet on the NetWare server is not set to Disable.

REMOTE SERVER MODE

Check the correct print server is operating on the file server.

Check the print server name operating on the file server and the print server name set in the NIC are the same.

Check the printer name displayed in the print server monitor of the file server and the NetWare port name set in the NIC are the same. If there are multiple network interface cards, configure the NetWare port names to be different.

PRINT SERVER MODE

Check the file server name set in the NIC and on the file server are the same.

Check the printer name set in the file server and the NetWare port name set in the NIC are the same. If there are multiple NICs, configure the NetWare port names to be different.

Check the NetWare login password is correct.

Check the machine name is the same as the print server name set in the file server.

PRINTER DOES NOT PRINT.

Check the network cable is correctly connected. Change the cable and try again.

Turn the printer off for 15 seconds and then on again. Check the NIC is connected to the file server.

Check the printer driver has been mapped to the correct netware queue.

Troubleshooting> 89

Image 89

Contents Olivetti d-Color P20W/P26W/P26 Preface Contents Preface Appendix E-Mail Alert Function Introduction Network ConfigurationSELF-DIAGNOSTIC Test SpecificationEthernet address is therefore 00808784E3F1 Configuration UtilitiesMAC Address 00808784E3F1 Telnet Using Quick SetupNetwork Configuration Using Adminmanager Menu Function Select Start-Programs-Oki Setup Utility-Admin ManagerHttp EtherTalkBootp This allows you to configure TCP/IP related itemsGeneral Tab TCP/IP TabNetWare Tab This is where you can configure NetWare related itemsFile server box Rprinter This allows you to configure NetBEUI related items This allows you to configure EtherTalk related itemsEtherTalk Tab NetBEUI TabTrap This allows you to configure Snmp related itemsSmtp Tab Explanation IPX Printer Trap POP3 This allows you to configure POP related itemsPOP Tab Smtp Tab, you can configure Smtp related items Following items Can be configured Explanation Create a Netware Queue Pserver Follow the on-screen instructionsNDS Delete Netware Object IP Address Setup Option menu, the following item can be selected Using a WEB Browser Adjusting Printer Settings # ping # arp -s 192.168.20.127 0080870100D2 tempNetwork Configuration Level DHCP/BOOTPJob Timeout Wins Server Pri IPX Trap Enable Level Level Level Your change. To exit without saving your modification Using Snmp Management Utility Printsupervision Windows Operating Service IIS1 Mdac System Pack NET FrameworkSupported Browsers Supported Printers Uninstallation Printing Utility MANUFACTURERS’ LPR Uninstallation Overview Installation of TCP/IP ProtocolIPX Novell NetWare NetBEUI IPPClick the Start button and select Control Panel Network Printer IP Address Configuration Using NetWare protocol Using TCP/IP protocolUsing EtherTalk protocol Using NetBEUI protocolMicrosoft LPR Please follow the procedure described onMicrosoft LPR Port IPP PortWindows XP requires administrator privileges Port Netbeui Protocol Novell Netware IPXComputer Name Name Assigned to the Printer Printer Driver Configuration Microsoft Windows Novell Netware Ndps Gateway Printing the ConfigurationSetup Utilities Novell NetWare Novell NetWare Iprint Unix Configuration# ping Exit setup Please select 1- 99? # ping c7350 Operating System Configuration192.168.20.127 c7350 # /usr/lib/lpd Check that lpd printer daemon is activated# ps aux grep lpd SUN Solaris 2.X Configuration # /bin/enable c7350lp # /usr/sbin/lpadmin -p c7300v2lp -I postscript# usr/sbin/lpshut # /usr/sbin/lpschedHP-UX 10.X Configuration # /usr/sbin/lpshut Enable the printer spoolerPrinter stream tcp nowait root /usr/sbin/ rlpdameon Restart inetdActivate the remote printer daemon # ruser -a -p c7350# smit mkrque # startsrc -s lpd # mkitab ‘lpd2oncestartsrc -s lpd’LPD Printing Logical printers# lpr -Pc7350lp test.prn BSD-based Unix# lprm -Pc7350lp System V-based UnixVerify the printer status using the lpstat command # cancel c7350lpExample To delete a print job Job ID 456 in the c7350lp # lpstat -pc7350lpUnix Ftp put test.prn Logout from the network card using the quit commandFtp put /users/test/test.prn /lp Ftp quitAll Macintosh operating systems from OS 8.1 are supported Supported VersionsSetup Utilities for MAC OS 8.X Macintosh OS-X Troubleshooting Netware Remote Server Mode Ethertalk NetbeuiGlossary Appendix E-MAIL Alert Function Page