#startsrc –s lpd
#mkitab ‘lpd:2:once:startsrc –s lpd’
5.Add the print queue using the smit command.
(a)Activate the smit command and convert to the item [Add print queue].
#smit mkrque
(b)Select [remote] (the printer connected to the remote host) from [Type of connection].
(c)Select [Standard procedure] from Type of remote print.
(d)Carry out the following settings in [Add a standard remote print queue]. If the configuration differs from below, configure according to environment.
Example: Use port lp with print queue c7350_lp and print server c7350
Queue to be added | “c7350_lp” |
Host name of the remote |
|
server | “c7350” |
Queue name of the remote |
|
server | “lp” |
Type of print spooler of |
|
the remote server | “BSD” |
Description of printer |
|
name of the remote server | “Optional comment” |
LPD Printing
Line Printer Daemon (LPD) is the most common protocol for printing with TCP/IP to a network printer. Refer to the workstation’s manual for details of lpr and lp commands. The following explanation in this section uses the printing of print file test.prn with printer name c7350_lp as an example.
Logical printers
The printer’s network interface includes three logical printers.
UNIX> 79