Olivetti P26W, P20W manual Specification, SELF-DIAGNOSTIC Test

SPECIFICATION

Frame Types	IEEE 802.2
	IEEE 802.3
	Ethernet-II, SNAP, AUTO
Network Interface	100BASE-TX
	10BASE-T
Network Protocols	TCP/IP
	Network layer	ARP, RARP, IP, ICMP
	Session layer	TCP, UDP
	Application layer LPR, FTP, TELNET, HTTP,
		IPP, BOOTP, DHCP, SNMP,
		DNS, SMTP, POP3, SLP,
		Rendezvous
	IPX/SPX (NetWare)
	Remote printer mode (up to eight file
	servers and 32 queues)
	Print server mode over IPX/SPX (up to
	eight print servers)
	Encrypted password supported in print
	server mode
	SNMP
	EtherTalk
	ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP,
	PAP
	NetBEUI
	SMB, NetBIOS, WINS
Functions	Self-diagnostic test printing
	Banner supported
	Monitoring and configuration by Web browser
	Printer status notification by E-Mail

SELF-DIAGNOSTIC TEST

With the printer power switched on, press the push-button located on the network interface panel (at the rear of the printer) for more than three seconds and release. The self-diagnostic test results and configuration settings are printed.

Network Configuration> 7