Olivetti P20W, P26W manual # usr/sbin/lpshut, # /usr/sbin/lpadmin -p c7300v2lp -I postscript

If there is no reply, there is a problem with the configuration of the IP address (the IP address has already been set manually or dynamically), or with the network.

Reset the network interface card settings to default and try to set a temporary IP address. If you still have the problem after resetting the network interface card, consult the network manager.

5.Register the network card as a remote printer server. Example: for host name c7350

(a)Stop the print scheduler.

#usr/sbin/lpshut

(b)Create the printer queue.

#/usr/sbin/lpadmin -p c7350_lp -v /dev/ null \

-m netstandard -o dest=c7350:lp -o protocol=bsd

(c)Set the queue to accept PostScript print jobs.

#/usr/sbin/lpadmin -p c7300v2_lp -I postscript

(d)Start the print scheduler.

#/usr/sbin/lpsched

(e)Activate the print queue.

#/usr/sbin/accept c7350_lp

(f)Enable the print queue

#/bin/enable c7350_lp

To customise output, for example to add additional commands at the start of each print job, you can edit a copy of the netstandard model file then add it using the lpadmin command.

Example: for printer c7350_lp, with model file called c7350_model

#/usr/sbin/lpshut

#/usr/sbin/lpadmin –p c7350_lp –m c7350_model

#/usr/sbin/lpsched

UNIX> 75