Olivetti P26W, P20W manual Using TCP/IP protocol, Using NetWare protocol, Using EtherTalk protocol

The Ethernet address of the printer can be found on the self-diagnostic printout, which can be printed by pressing the push-button on the network card panel for three seconds and then releasing it.

Using TCP/IP protocol

When using lpr in UNIX and other TCP/IP environments, please select [Yes]. To use in a TCP/IP environment, an IP address should be assigned to the Ethernet card.

If [Yes] has been selected and TCP/IP is the only working protocol and the IP address has not already been assigned, you can either obtain an IP address automatically or assign an IP address.

When [Obtain an IP address automatically] is selected, the device IP address will be automatically assigned by the DHCP server. In an environment without a DHCP server, please assign the IP address manually.

If you are assigning an IP address, you need to enter:

•An IP address

•Subnet mask

•Gateway address.

8.Click [Next].

Using NetWare protocol

Consult your network manager to ensure that the NetWare file server is properly installed and working on the network. Make sure that NetWare Client32 or IntranetWare Client is installed on your computer.

On selecting [Yes] you will be asked if [You set-up the queue from the Wizard]?

Using EtherTalk protocol

EtherTalk is the required protocol for printing data from the Macintosh environment.

Using NetBEUI protocol

Using NetBEUI makes it easy to manage your Oki product and print within the network environment of Windows.

9.Confirm your configuration. If everything is correct, click [Execute] to apply the configuration.

10.Set-up has now been completed. Click [Finish].

Microsoft Windows> 55