Olivetti P20W, P26W manual Using Quick Setup, Telnet

UTILITY	FEATURES	SYSTEM
		REQUIREMENTS
Telnet	Configure the NIC using	Third-party vendor
	TELNET.	developed TELNET
		client package.
		A TELNET Application is
		standard in Windows/
		UNIX/Linux.
SNMP	The printer and network	Third-party vendor
	card can be controlled	developed SNMP
	using third-party	application.
	vendor developed SNMP
	application.

USING QUICK SETUP

Quick Setup utility allows you to configure the network interface easily and simply without installing any software packages.

You can configure the following:

>Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI protocols.

>Set IP address, Subnet Mask and Gateway for TCP/IP manually or by using DHCP.

>Set NetWare mode and create Queue/Print Server/Printer objects.

>Zone name and Port name for EtherTalk.

Configuration requires a PC with Windows 2000 Advanced Server/Professional or Windows XP running TCP/IP or IPX/SPX (NetWare).

This utility can only be used on a PC that can be connected to the network with TCP/IP or IPX/SPX.

This utility must be used on a PC that is located on the same segment as the printer.

To create a NetWare queue, NetWare Client 32 or IntranetWare Client should be installed in your system.

The following explanation uses Windows 98 as an example.

Network Configuration> 9