Olivetti P26W, P20W manual Option menu, the following item can be selected

OPTION MENU

In the [Option] menu, the following item can be selected:

ITEM	EXPLANATION
Use TCP/IP	If this item is selected, AdminManager uses TCP/IP
Protocol	protocol to search/configure network interface cards.
Use IPX/SPX	If this item is selected, AdminManager uses IPX/SPX
Protocol	protocol to search/configure network interface cards.
Environment	TCP/IP Tab
Setup	Set broadcast addresses that are
	used to search printers using the
	TCP/IP protocol. If [Use TCP/IP
	protocol] is unchecked, the
	search will not be carried out
	using TCP/IP.
	NetWare Tab
	Set network addresses that are
	used to search printers via
	NetWare protocol. If there any
	many NetWare file servers on
	your network, specify the
	network address to which the
	network card belongs. If [Use
	NetWare protocol] is unchecked,
	the search will not be carried out
	using NetWare, but if [Auto
	Search] is selected, AdminManager will search all
	networks that AdminManager can detect.
	TimeOut Tab
	[Search Every]: Set response
	waiting time from a network card
	in seconds.
	[Time Out]: Set time out
	between AdminManager and the
	network interface card in
	seconds.
	[Retry]: Set how many times the retry will be carried
	out between AdminManager and the network
	interface card.

Network Configuration> 31