Nintendo 2000 manual CMshow interface ?, ¾ show interface ethernet, CMshow interface ethernet

Page 38

2	172.17.0.0	255.255.0.0	172.17.100.134	1	connected
3	92.0.0.0	255.0.0.0	172.17.100.254	1	RIP
4	30.0.0.8	255.255.255.248	30.0.0.9	1	connected
5	30.0.0.0	255.0.0.0	30.0.0.9	1	connected

¾show interface

Display interface information

Example:

CM>show interface ?

ethernet	Display ETHERNET interface information
cable	Display CABLE interface information
usb	Display USB interface information

¾show interface ethernet

Display ethernet interface configuration

Example:

CM>show interface ethernet

Interface Ethernet

MAC address: 00D0.5904.5E16

IP address 30.0.0.9 subnet-mask 255.255.255.248

Link status: link

Mode: 10Mbps, half-duplex

RIP status: Enable

RIP send version: 2

¾show interface cable Display cable interface information

Example:

CM>show interface cable

Interface Cable

MAC address: 0008.0E86.1118

IP address 10.71.135.99 subnet-mask 255.255.240.0

Downstream information

FEC Lock : Locked

Downstream Frequency : 561000000 Hz

Downstream Modulation : 64 QAM

Downstream Interleave Depth : 32

Downstream Receive Power Level : -1.18 dBmv

User’ Guide

38

Image 38

Contents Orion Contents Nvram Tftp Mode of Operation Understand the Cable Modem’s Features Contact Your Local Cable OperatorSupplied Prepare Your Area for Cable Modem InstallationGather Supplied and Required Items Not SuppliedInstalling the Cable Modem Using the USB Port Installing the Software Drivers Before Hardware ConnectionPage Page Installing the Hardware Installing the Software DriversUser’ Guide User’ Guide Page Page Page User’ Guide Page Click Yes to restart the computer User’ Guide Page Page Page Page Page Click Finish to complete the installation User’ Guide Troubleshooting the USB Installation None of the LEDs is on when I power on the LAN Cable ModemUninstalling the USB Driver Select USB Composite Device and click Remove Click RefreshInstalling the Modem Using the Ethernet Port Enet LED on my cable modem is not lit Troubleshooting the Ethernet InstallationNone of the LEDs are on when I power on the Cable Modem Page Cable Modem LEDs and Connectors LEDs on the Front of the ModemConnectors on the Back of the Modem Telnet commands Getting HelpCMshow interTab CMshow interface Redisplaying a command CMshow ?Debug Image PingUser-Level PasswordTracert Show ¾ show interface ethernet ¾ show interfaceCMshow interface ? CMshow interface ethernetCMshow interface usb CMshow running-config¾ show interface usb Qpsk ¾ show cpe-info Display CPE information ¾ show cpe-limitCMshow downstream CMshow cpe-limit¾ show downstream Display downstream information ¾ show upstream¾ show nat timer ¾ show nat configCMshow nat config ¾ show ripCMshow access-list CMshow nat timer¾ show access-list ¾ show pppoe-forwarding Display PPPoE enable or disableHost-name CM dhcp ip-pool 192.168.10.2 CMshow dhcp ¾ host-name delete Delete host-nameCustomer-123host-name delete ¾ dhcp ip-pool delete¾ dhcp gateway ip address Set local Dhcp gateway ip address ¾ dhcp reserve-mac delete 1-16allCMnat static ipmapping add 64.168.39.3 ¾ dhcp dns delete 1~4/allOne to one mapping Port forwarding setting ¾ nat static ipmapping delete index/allCMnat static portmapping delete CMnat static ip disableCMnat static ip enable NAT static ipInterfaces CMnat static gateway¾ interface ethernet startup ¾ interface cable upstream channel id¾ interface usb shutdown ¾ interface cable rip send-version¾ interface cable startup ¾ interface usb startup¾ rip version 1/2/2b ¾ rip timer response 10-65535 second¾ rip silence-mode enable/disable CMrip key-chain 1 1 start-time 2002-04-20 ¾ rip defaultCMrip key-chain 1 1 key-string abcdefg Access-list ¾ web-access password string Set web-access password¾ pppoe-forwarding enabledisable CMaccess-list 21 permit 192.168.100.10¾ access-list delete list IDall CMcopy tftpconfig 68.5.203.15 4ips.txt¾ snmp community string ro ¾ reset¾ snmp community ¾ write¾ ip nat enable Bridge modeNAT mode Routing mode ¾ ip route enableNAT/Routing mode ¾ ip natroute enableAccessing the Web User Interface Web User Interface HomeCable Modem Information Cable Modem Status Downstream Upstream Upstream Burst Operation Parameters Event Log Router/NAT configuration Bridge ModeWAN Interface NAT Mode Gateway LAN InterfaceReset SubmitRouter Mode Routing Protocol LAN Interface Delete Key ChainAdd NAT Router Mode Routing Protocol Gateway LAN Interface Authentication mode Authentication Key Chain Reset Gateway LAN Setup Page Docsis configuration file Vsif tag support