Example:
CM>show nat timer
Aging Timer (second)
ICMP protocol : 5 (secs)
UDP protocol : 1800 (secs)
TCP protocol : 3600 (secs)
GRE protocol : 3600 (secs)
Default Time OUT : 5 (secs)
¾show user
Display all telnet user information
Example: |
|
|
| |
CM>show user |
|
|
| |
Index | User Name | From | Alive(sec) | Idle(sec) |
1 | admin | 192.168.100.2 | 221 | 1 |
¾show access-list
Display access list information
Example:
CM>show access-list
Access List |
| |
ID | Control | Address |
41 | Permit | 00D0.5900.0000, hardware address mask FFFF.FF00.0000 |
42 | Permit | 0008.0E00.0000, hardware address mask FFFF.FF00.0000 |
1 | Permit | 192.168.100.0, wildcard bits 0.0.0.16 |
21 | Permit | 64.168.39.0, wildcard bits 0.0.0.8 |
¾show snmp
Display SNMP parameters
Example:
CM>show snmp
SNMP
¾show pppoe-forwarding Display PPPoE enable or disable.
Example: |
|
User’ Guide | 44 |