Nintendo 2000 ¾ show rip, CMshow rip, ¾ show nat config, CMshow nat config, ¾ show nat timer

Page 43

¾show rip

Display RIP information

Example:

CM>show rip

IP Route disables.

Key Chain-1 information
ID	String	Start Time	Expire Time
1	abcdefg	2001-1-1 00:00:00	infinite
Key Chain-2 information
ID	String	Start Time	Expire Time
1	AmbitString	2001-1-1 00:00:00	infinite

¾show nat config

Display all settable NAT/PAT information

Example:

CM>show nat config

NAT : Enable

WAN SETUP :

NAT public IP configuration : Automatically

NAT public IP address : 68.101.124.67 Subnet Mask : 255.255.255.0

NAT public Gateway IP address : 68.101.124.1

LAN SETUP :

Sub Ethernet interface IP address 192.168.100.1 subnet-mask 255.255.255.0

DHCP Server Pool Table :

DHCP server support 512 IP, Created 20 IP

Pool Index

Begin IP

End IP

1192.168.100.1 192.168.100.21 Provision assigned DNS 68.4.16.25 Provision assigned DNS 68.2.16.30

Provision assigned DNS 68.6.16.30

DHCP server lease time : 1800

¾show nat timer

Display all settable NAT/PAT information

User’ Guide

43

Image 43

Contents Orion Contents Nvram Tftp Mode of Operation Contact Your Local Cable Operator Understand the Cable Modem’s FeaturesNot Supplied Prepare Your Area for Cable Modem InstallationGather Supplied and Required Items SuppliedInstalling the Software Drivers Before Hardware Connection Installing the Cable Modem Using the USB PortPage Page Installing the Software Drivers Installing the HardwareUser’ Guide User’ Guide Page Page Page User’ Guide Page Click Yes to restart the computer User’ Guide Page Page Page Page Page Click Finish to complete the installation User’ Guide None of the LEDs is on when I power on the LAN Cable Modem Troubleshooting the USB InstallationSelect USB Composite Device and click Remove Click Refresh Uninstalling the USB DriverInstalling the Modem Using the Ethernet Port None of the LEDs are on when I power on the Cable Modem Troubleshooting the Ethernet InstallationEnet LED on my cable modem is not lit Page LEDs on the Front of the Modem Cable Modem LEDs and ConnectorsConnectors on the Back of the Modem Getting Help Telnet commandsCMshow ? CMshow interTab CMshow interface Redisplaying a commandDebug Ping ImageTracert PasswordUser-Level Show CMshow interface ethernet ¾ show interfaceCMshow interface ? ¾ show interface ethernet¾ show interface usb CMshow running-configCMshow interface usb Qpsk ¾ show cpe-limit ¾ show cpe-info Display CPE information¾ show upstream CMshow cpe-limit¾ show downstream Display downstream information CMshow downstream¾ show rip ¾ show nat configCMshow nat config ¾ show nat timer¾ show pppoe-forwarding Display PPPoE enable or disable CMshow nat timer¾ show access-list CMshow access-listHost-name ¾ dhcp ip-pool delete ¾ host-name delete Delete host-nameCustomer-123host-name delete CM dhcp ip-pool 192.168.10.2 CMshow dhcp¾ dhcp reserve-mac delete 1-16all ¾ dhcp gateway ip address Set local Dhcp gateway ip addressOne to one mapping ¾ dhcp dns delete 1~4/allCMnat static ipmapping add 64.168.39.3 ¾ nat static ipmapping delete index/all Port forwarding settingNAT static ip CMnat static ip disableCMnat static ip enable CMnat static portmapping deleteCMnat static gateway Interfaces¾ interface cable upstream channel id ¾ interface ethernet startup¾ interface usb startup ¾ interface cable rip send-version¾ interface cable startup ¾ interface usb shutdown¾ rip silence-mode enable/disable ¾ rip timer response 10-65535 second¾ rip version 1/2/2b CMrip key-chain 1 1 key-string abcdefg ¾ rip defaultCMrip key-chain 1 1 start-time 2002-04-20 ¾ web-access password string Set web-access password Access-listCMcopy tftpconfig 68.5.203.15 4ips.txt CMaccess-list 21 permit 192.168.100.10¾ access-list delete list IDall ¾ pppoe-forwarding enabledisable¾ write ¾ reset¾ snmp community ¾ snmp community string roNAT mode Bridge mode¾ ip nat enable ¾ ip route enable Routing mode¾ ip natroute enable NAT/Routing modeWeb User Interface Home Accessing the Web User InterfaceCable Modem Information Cable Modem Status Downstream Upstream Upstream Burst Operation Parameters Event Log Bridge Mode Router/NAT configurationSubmit NAT Mode Gateway LAN InterfaceReset WAN InterfaceRouter Mode Routing Protocol LAN Interface Add Key ChainDelete NAT Router Mode Routing Protocol Gateway LAN Interface Authentication mode Authentication Key Chain Reset Gateway LAN Setup Page Docsis configuration file Vsif tag support