Nintendo 2000 manual

Page 21

Next to have Windows locate the necessary driver files. You will see the following screen.

5. Click Next to install the driver files for the cable modem. You will see the following screen.

User’ Guide

21

Image 21

Contents Orion Contents Nvram Tftp Mode of Operation Contact Your Local Cable Operator Understand the Cable Modem’s FeaturesGather Supplied and Required Items Prepare Your Area for Cable Modem InstallationSupplied Not SuppliedInstalling the Software Drivers Before Hardware Connection Installing the Cable Modem Using the USB PortPage Page Installing the Software Drivers Installing the HardwareUser’ Guide User’ Guide Page Page Page User’ Guide Page Click Yes to restart the computer User’ Guide Page Page Page Page Page Click Finish to complete the installation User’ Guide None of the LEDs is on when I power on the LAN Cable Modem Troubleshooting the USB InstallationSelect USB Composite Device and click Remove Click Refresh Uninstalling the USB DriverInstalling the Modem Using the Ethernet Port Troubleshooting the Ethernet Installation None of the LEDs are on when I power on the Cable ModemEnet LED on my cable modem is not lit Page LEDs on the Front of the Modem Cable Modem LEDs and ConnectorsConnectors on the Back of the Modem Getting Help Telnet commandsCMshow ? CMshow interTab CMshow interface Redisplaying a commandDebug Ping ImagePassword TracertUser-Level Show CMshow interface ? ¾ show interface¾ show interface ethernet CMshow interface ethernetCMshow running-config ¾ show interface usbCMshow interface usb Qpsk ¾ show cpe-limit ¾ show cpe-info Display CPE information¾ show downstream Display downstream information CMshow cpe-limitCMshow downstream ¾ show upstreamCMshow nat config ¾ show nat config¾ show nat timer ¾ show rip¾ show access-list CMshow nat timerCMshow access-list ¾ show pppoe-forwarding Display PPPoE enable or disableHost-name Customer-123host-name delete ¾ host-name delete Delete host-nameCM dhcp ip-pool 192.168.10.2 CMshow dhcp ¾ dhcp ip-pool delete¾ dhcp reserve-mac delete 1-16all ¾ dhcp gateway ip address Set local Dhcp gateway ip address¾ dhcp dns delete 1~4/all One to one mappingCMnat static ipmapping add 64.168.39.3 ¾ nat static ipmapping delete index/all Port forwarding settingCMnat static ip enable CMnat static ip disableCMnat static portmapping delete NAT static ipCMnat static gateway Interfaces¾ interface cable upstream channel id ¾ interface ethernet startup¾ interface cable startup ¾ interface cable rip send-version¾ interface usb shutdown ¾ interface usb startup¾ rip timer response 10-65535 second ¾ rip silence-mode enable/disable¾ rip version 1/2/2b ¾ rip default CMrip key-chain 1 1 key-string abcdefgCMrip key-chain 1 1 start-time 2002-04-20 ¾ web-access password string Set web-access password Access-list¾ access-list delete list IDall CMaccess-list 21 permit 192.168.100.10¾ pppoe-forwarding enabledisable CMcopy tftpconfig 68.5.203.15 4ips.txt¾ snmp community ¾ reset¾ snmp community string ro ¾ writeBridge mode NAT mode¾ ip nat enable ¾ ip route enable Routing mode¾ ip natroute enable NAT/Routing modeWeb User Interface Home Accessing the Web User InterfaceCable Modem Information Cable Modem Status Downstream Upstream Upstream Burst Operation Parameters Event Log Bridge Mode Router/NAT configurationReset NAT Mode Gateway LAN InterfaceWAN Interface SubmitRouter Mode Routing Protocol LAN Interface Key Chain AddDelete NAT Router Mode Routing Protocol Gateway LAN Interface Authentication mode Authentication Key Chain Reset Gateway LAN Setup Page Docsis configuration file Vsif tag support