Nintendo 2000 manual CMaccess-list 21 permit 192.168.100.10, ¾ access-list delete list IDall

CM>access-list 21 permit 192.168.100.10 0.0.0.0

Note: No network packet will be filtered

3)Set the access list to permit source MAC 00D0.5921.3354 to access network CM>access-list 41 permit 00d0.5921.3354 ffff.ffff.ffff

Note: The cable router only forward packet with this source MAC, all other packet will be discarded.

¾access-list delete {list IDall}

Delete a specific access-list or delete all access-list.

PPPoE-Forwarding

¾pppoe-forwarding {enabledisable}

Enabledisable PPPoE packet pass-through the NAT gateway.

Copy

¾copy tftp:config {tftp server ip address} {configuration filename}

Download the Cable Router configuration from remote tftp server. The configuration file must be text file.

Example:

CM>copy tftp:config 68.5.203.15 4ips.txt

Download the 4ips.txt Cable Router configuration from TFTP server 68.5.203.15

Clear

¾clear arp Clear ARP table.

CPE-limit

¾cpe-limit ip {1-256unlimited}

Limit the number of CPEs based on IPs, or unlimited

¾cpe-limit mac {1-256unlimited}

User’ Guide 57