![](/images/new-backgrounds/1119103/11910351x1.webp)
Chapter 1 Enable The Validator
Enable The Validator
NOTE: If you make any changes to the default configuration menu items, you will be prompted to save the configuration. See “Auto Save Configuration” in the Quick Setup Guide.
Software can automatically detect an installed validator when the printer is powered up. If the printer is powered up with
If
.
1. Press .. to take the printer offline and place the printer in Menu mode.
2. If necessary, press ↓ and ↵ at the same time to unlock the
↵ key. (This key combination can be changed by the user. Use the customer’s key combination if necessary.)
.
3. If necessary, press .. until VALIDATOR displays.
4. Press ↓ until Validator Funct. displays.
5. Press + or – until the Enable displays.
6. Press ↵ to enable the validator. An asterisk (*) should appear after Enable. Once enabled, the printer will command the validator to begin scanning and reporting errors, and the counters will be incremented.
7. Press ↓ and ↵ at the same time to lock the ↵ key, then press PAUSE to take the printer offline.
8. Press PAUSE again to put the printer online.
26