Printronix T5000R user manual Error Messages Message List Explanation Solution

				Error Messages
		Table 6. Message List
Message		Explanation		Solution
Unscannable code			6.	Press PAUSE to clear
check media				the message.
(continued)			7.	In the VALIDATOR
				menu, press ↓ until
				Clear Data displays,
				then press ↵.
Validator not	1.	The Validator Funct. =	1.	Check that the validator
communicating		Enable in the		signal cable is securely
		VALIDATOR menu, but		connected to the
		when the printer was first		validator unit.
		powered up it could not	2.	Select Validator Funct.
		communicate with it.
				= Disable in the
	2.	The validator was		VALIDATOR menu.
		connected to the printer		Save this setting in the
		and then later removed.		Power-Up configuration
				in the CONFIG CTRL
				menu and reboot the
				printer.

91