Printronix P7000 H-Series, PSA3 manual Select Dbcs Print Quality, Select Double-strike Printing

Select DBCS Print Quality

Select DBCS Print Quality

ASCII Code	FS x n
Hex Code	1C 78 n
Dec Code	28 120 n
Purpose	Selects different print quality according to the following values:
	n = 0 or 48LQ
	n = 1 or 49Hi-Speed
	n = 2 or 50Near LQ
	n = 3 or 51Super Hi-Speed
	n = 4 or 52Normal
	n = 5 or 53Ultra Hi-Speed
	Where:
	n = 0, 1, 2, 3, 4, 5, 48, 49, 50, 51, 52, 53
Comment	This command affects the front panel selection of “Typeface.”
	This command only works in DBCS mode.
	The default mode is according to the setting of front panel.

Select Double-strike Printing

ASCII Code	ESC G
Hex Code	1B 47
Dec Code	27 71
Purpose	Prints each dot twice, with the second slightly below and right to
	the first, creating a bolder character.
Comment	The default is Normal (non double-strike) style.

Cancel Double-strike Printing

ASCII Code	ESC H
Hex Code	1B 48
Dec Code	27 72
Purpose	Cancels double-strike printing selected with the ESC G
	command.
Comment	The default is Normal (non double-strike) style.

59