Printronix P7000 H-Series, PSA3 manual Tab Horizontally, Tab Vertically

Tab Horizontally

Tab Horizontally

ASCII Code	HT
Hex Code	09
Dec Code	09
Purpose	Moves the horizontal print position to the next tab to the right of
	the current print position.
Comment	The printer ignores this command if no tab is set to the right of
	the current position or if the next tab is to the right of the right
	margin.
	Character scoring (underline, overscore, and strike through) is
	not printed between the current print position and the next tab
	when this command is sent.
	In DBCS mode, the command takes effect in double byte
	character setting.

Tab Vertically

ASCII Code	VT
Hex Code	0B
Dec Code	11
Purpose	Moves the vertical print position to the next vertical below the
	current print position.
	Moves the horizontal print position to the left-margin position.
Comment	The printer advances to the top-margin position of the following
	page if the next tab is below the bottom-margin position or if no
	tab is set below the current position.
	The VT command functions the same as a CR command
	(moves the horizontal print position to the left-margin position) if
	all tabs have been cancelled with the ESC B NUL command.
	The VT command functions the same as an LF command
	(advances one line in the current line spacing and moves the
	horizontal print position to the left-margin position) if no tabs
	have been set since the printer was turned on or was reset with
	the ESC@ command.
	The VT command functions the same as an FF command
	(advances to the top-margin position on the next page) if some
	tabs have been set, but no tab is set between the current print
	position and the bottom-margin position.
	This command cancels double-width printing set with the SO,
	ESC SO, or FS SO commands.

75