Printronix SL5000r manual Printing a Configuration

Page 52

Printing A Configuration

Printing A Configuration

We recommend that you print and store your configurations for future reference. The printout provides a list of the parameters that were set when you configured the printer.

To print a configuration:

.

1. Press the .. key until PRINTER CONTROL displays.

2. Press and together until ENTER SWITCH / UNLOCKED displays.

3. Press until Admin User displays.

4. Press until Enable displays.

5. Press to select it. An asterisk (*) appears next to Enable.

.

6. Press .. until CONFIG. CONTROL displays.

7. Press until Print Config. displays.

8. Press + or to cycle through the following printout options:

Current*

Factory Power-Up All

1 to 8 (customized configurations)

9. When the desired option displays, press . The printer prints the specified configuration.

NOTE: If the configuration you want to print has not been saved,

CONFIG. DOES NOT EXIST/Save First displays momentarily.

This message indicates that no configuration menu has been saved under the configuration value you have selected and therefore cannot be printed. You must either select another configuration to print or save a configuration to that configuration value first (see “Saving The Configuration” on page 50).

52

Image 52
Contents Quick Setup Guide Page Page Software License Agreement DefinitionsTermination of License Agreement Communication Notices CanadaCE Notice European Union Declaration Of ConformityTaiwan Lithium Battery Warning Trademark AcknowledgementsTable of Contents Table of Contents Unpacking And Installing The Printer Unpacking The PrinterUnpacking And Installing The Printer Removing The Internal Packing MaterialInstallation InstallationControls And Indicators Power SwitchControls And Indicators Control PanelLiquid Crystal Control Panel Keys JOB Select KeyDown Key in Menu mode Menu Key Control PanelLoading Media And Ribbon Loading Media And RibbonLoading Roll Media Loading Roll MediaMedia Roll Media Hanger Guide Media Width Media Damper Loading Roll Media Lower Media Sensor Fixed Guide Media Width Notch Loading Ribbon Loading Ribbon Loading Media And Ribbon Printing Adjustments Printhead Pressure AdjustmentPrinthead Pressure Block Adjustments Left Pressure BlockPrinting Adjustments Positioning The Media SensorsPositioning The Media Sensors FeedRunning Auto Calibrate Calibrating The PrinterCalibrating The Printer Running Auto Calibrate Making a Media Profile Printout Gap Sensing Making a Media Profile Printout255 191 127 Advanced Gap Sensing Paper Out075 Configuring The Printer Changing The Active IGP EmulationQuick Setup Menu Quick Setup MenuCont. from previous Quick Setup Menu Items Print ModePrint Intensity Print SpeedQuick Setup Menu Items Media HandlingPaper Feed Shift Label LengthLabel Width Ver Image ShiftHor Image Shift OrientationEdgetopTheof isimagethe thetoparallelleft theofedgemedia Quick Setup Menu Items Gap/Mark Sensor Gap Sensing for Smart LabelsAuto Calibrate Validator Funct Save ConfigActive IGP Emul Power-Up Config SMT StatusSMT Sel Toolset SMT Select ToolAuto Save Configuration Saving The ConfigurationSaving The Configuration Selecting The Power-Up Configuration Loading a Saved ConfigurationPrinting a Configuration Printing a ConfigurationRun a Barcode Demo Test Cleaning General CleaningCleaning The Printhead, Platen Roller, Media Sensors ExteriorPlaten Roller Cleaning Media Sensor CleaningMedia Damper Cleaning Cleaning The Printhead, Platen Roller, And Media SensorsCleaning Upper Media Sensor From Printhead Heating Elements Repacking The Printer Repacking The PrinterMedia Cover window side Straps not supplied Contact Information Printronix Customer Support CenterPrintronix Supplies Department Contact InformationCorporate Offices For More InformationCorporate Offices Page Page 178423-001