Ultimate Technology 500 POS manual 21 or

Table 3. Local Mode Programming Instructions - Continued

Note: *Default Settings

Function Code(s)	Operation		Normal Indication	Remarks
21 or 31	1.	While in programming mode, at Series 500 Keyboard numeric keypad, enter Function
Main Port 0 (21)		Code 21 (Port 0) or 31 (Port 1).
AUX Port 1 (31)
Stop Bits			LED (2) turns on.
	2.	At Series 500 Keyboard numeric keypad, enter the number of stop bits (1 or 2) per
		list below.
			1 = one stop bit
			2 = two stop bits*
			LED (2) turns off.
	3.	Program the next function code or exit programming mode by entering 99 on Series
		500 Keyboard numeric keypad or by swiping the Programmer's card. If using the
		optional 3-position keyswitch, move switch out of the AUX position.
22 or 32	1.	While in programming mode, at Series 500 Keyboard numeric keypad, enter Function
Main Port 0 (22)		Code 22 (Port 0) or 32 (Port 1).
AUX Port 1 (32)
Parity			LED (2) turns on.

2.At Series 500 Keyboard numeric keypad, enter the applicable number (0, 1 or 2) to select type of parity per list below.

0 = none*

1 = odd

2 = even

LED (2) turns off.

3.Program the next function code or exit programming mode by entering 99 on Series 500 Keyboard numeric keypad or by swiping the Programmer's card. If using the optional 3-position keyswitch, move switch out of the AUX position.

24