Ultimate Technology 500 POS manual Local Mode Programming Function Codes and Default Settings

Table 2. Local Mode Programming Function Codes and Default Settings

			secure (lock).
4 1	Keyswitch Position 2 BREAK	No output	Used to program the BREAK codes of
			the keyswitch . When the key is turned
			out of position 2, the switch can send
			macros and/or perform an internal
			secure (lock) .
4 2	Keyswitch Position 3 MAKE	No output	U s e d t o program the MAKE codes of
			the keyswitch . When the key is turned
			into position 3, the switch can send
			macros and/or perform an internal
			secure (lock) .
4 3	Keyswitch Position 3 BREAK	No output	Used to program the BREAK codes of
			the keyswitch. When the key is turned
			out of position 3, the switch can send
			macros and/or perform an internal
			secure (lock) .
4 4	Keyswitch Polling	U s e r	Allows the user to poll for keyswitch
		defined	1,2, or 3 MAKE/BREAK codes.	Two
			options are available: 0 = unsolicited
			m o d e i n w h i c h c o d e s a r e s e n t
			whenever the keyswitch is rotated, or 1
			= solicited mode in which codes	are
			s e n t o n l y w h e n a B 7 c o m m a n d i s
			executed .
4 5	Drawer 1 Open	D1+	Used to set up a unique sequence of
		(44h,31h,2B	keys so host computer can determine if
		h)	d r a w e r 1 i s o p e n o r c l o s e d .
4 6	D r a w e r 1 C l o s e d	D 1 -	Used to set up a unique sequence of
		(44h,31h,2D	keys so host computer can determine if
		h)	d r a w e r 1 i s o p e n o r c l o s e d .
4 7	Drawer 2 Open	D2+	Used to set up a unique sequence of
		(44h,32h,2B	keys so host computer can determine if
		h)	drawer 2 is open or closed .
4 8	D r a w e r 2 C l o s e d	D 2 -	Used to set up a unique sequence of
		(44h,32h,2D	keys so host computer can determine if
		h)	drawer 2 is open or closed .
49	Poll/Unsolicited Cash Drawer Status	Unsolicited	Allows the user to poll for cash drawer status,
			instead of sending it each time it changes
			state, open or closed. Two options are
			available: Send on change or transition, or
			send only with poll command CDCONT.
70	Indicator Lights Mode	Command	Used to select if the CAPS (2) and NUM (3)
		mode of	LOCK indicators function in the same manner
		operation	as a PC. Two options are available: PC mode
			or Command mode (Lights Command). Note
			that in the PC mode control of the indicators
			will be transferred to other higher priority
			commands if applied.

15