Ultimate Technology 500 POS manual LED 2 flashes

Table 3. Local Mode Programming Instructions - Continued

Note: *Default Settings

Function Code(s)	Operation		Normal Indication	Remarks
80	1.	While in programming mode, at the Series 500 Keyboard numeric
81		keypad, enter Function Code 80 or 81.
Define Position of
Left SHIFT Key			LED (2) flashes.
(80) and Right
SHIFT Key (81)	2.	At the auxiliary keyboard, hit the left SHIFT key if programming Function
		Code 80 or right SHIFT key if programming Function Code 81.
	3.	At the Series 500 Keyboard, press ENTER.
			LED (2) turns off.
	4.	Program the next function code or exit programming mode by entering 99
		on Series 500 Keyboard numeric keypad or by swiping the Programmer's
		card. If using the optional 3-position keyswitch, move switch out of the
		AUX position.
82	1.	While in programming mode, at the Series 500 Keyboard numeric
83		keypad, enter Function Code 82 or 83.
Define Position of
Left CONTROL Key			LED (2) flashes.
(82) and Right
CONTROL Key (83)	2.	At the auxiliary keyboard, hit the left		CONTROL key if programming
		Function Code 82 or right CONTROL key if programming Function Code
		83.
	3.	At the Series 500 Keyboard, press ENTER.
			LED (2) turns off.
	4.	Program the next function code or exit programming mode by entering 99
		on Series 500 Keyboard numeric keypad or by swiping the Programmer's
		card. If us ing the optional 3-position keyswitch, move switch out of the
		AUX position.
84	1.	While in programming mode, at the Series 500 Keyboard numeric
85		keypad, enter Function Code 84 or 85.
Define Position of
Left ALTERNATE			LED (2) flashes.
Key (84) and
Right ALTERNATE	2.	At the auxiliary keyboard, hit the left		ALTERNATE key if programming
Key (85)		Function	Code 84 or right ALTERNATE key if programming Function
		Code 85.

3.At the Series 500 Keyboard, press ENTER.

LED (2) turns off.

4.Program the next function code or exit programming mode by entering 99

30