Trane TR200 Parameters, Parameter List, Title Default value Range Conver Data Sion index Type

Parameters

Parameter Overview

Parameter List

Nr.	Title	Default value	Range	Conver-	Data
				sion index	type
8-01	Control Site	Dig. and ctrl. word [0]	[0 - 2]	-	5
8-02	Control Source	Drive RS485 [0]	[0 - 4]	-	5
8-03	Control Timeout Time	1 s	0.1–18000	- 1	7
8-04	Control Timeout Function	Off [0]	[0 - 10]	-	5
8-05	End-of-timeout Function	Hold set-up [0]	[0 - 1]	-	5
8-06	Reset Control Timeout	Do not reset [0]	[0 - 1]	-	5
8-07	Diagnosis Trigger	Disable [0]	[0 - 3]	-	5
8-10	Control Profile	Drive profile [0]	[0 - x]	-	5
8-30	Protocol	Drive
8-31	Address	1	[0 – 255]
8-32	Baudrate	38,400	[0 – 7]
8-33	Parity/Stop Bits	No Parity, 1 Stop Bit
8-35	Minimum Response Delay	10mS
8-36	Max Response Delay	5000mS
8-37	Max Inter-Char Delay	25.00mS
8-50	Coasting Select	Logic OR [3]	[0 - 3]	-	5
8-52	DC Brake Select	Logic OR [3]	[0 - 3]	-	5
8-53	Start Select	Logic OR [3]	[0 - 3]	-	5
8-54	Reversing Select	Logic OR [3]	[0 - 3]	-	5
8-55	Set-up Select	Logic OR [3]	[0 - 3]	-	5
8-56	Preset Reference Select	Logic OR [3]	[0 - 3]	-	5
8-70	BACnet Device Instance	1	[1-4194304]	-
8-72	MS/TP Max Masters	127	[1-127]	-
8-73	MS/TP Max Info Frames
8-74	“I am” Service	Once at power-up [0]	[0-1]	-
8-75	Initialization Password	“admin”	String[19]

Table 6. 1: BACnet specific parameter list

Please refer to the TR200 Drive Instruction Manual, MG.12.HX.YY for a comprehensive parameter list or to the TR200 Drive Programming Guide, MG.12.JX.YY for detailed descriptions of parameters.

TR200 BACnet 6-1