Telit Wireless Solutions GE863-QUAD, GE863-PY manual Camera Interface Connectors

GE863-QUAD

GE863-PY

1vv0300715 Rev. 1 - 19/09/06

12.1.1Camera Interface Connectors

The pinout of the module and a 24 pins ZIF connector for the CMOS camera provide the interface connection between GE863-QUAD / PY and Transchip camera.

GE863-QUAD / PY signal					TC5747MF24L
Pin	Signal	I/O	Notes	Pin	Signal	I/O
55	GPIO3	O	I2C bus serial clock	1	SCLK	I
8-17…	GND		Ground	2	AGND	I
31	VAUX	O	Power Supply	3	AVDD28*	I
5	GPIO9	O	Camera Reset	4	RESET_N	I
7	MON1_CAM	O	Clock	5	CLK_IN**	I
8-17…	GND		Ground	6	DGND	I
	n.c		n.c.	7	DOUT_0	I/O
	n.c		n.c.	8	DOUT_1	I/O
	n.c		n.c.	9	DOUT_2	I/O
	n.c		n.c.	10	DOUT_3	I/O
	n.c		n.c.	11	DOUT_4	I/O
	n.c		n.c.	12	DOUT_5	I/O
	n.c		n.c.	13	DOUT_6	I/O
	n.c		n.c.	14	DOUT_7	I/O
	n.c		n.c.	15	DOUT_8	I/O
	n.c		n.c.	16	VCLKOUT	O
	n.c		n.c.	17	VALIDH	O
	n.c		n.c.	18	VALIDV	O
31	VAUX	O	Power Supply	19	DVDD28	I
32	GPIO4	I/O	I2C bus serial data	20	SDIN	I/O
8-17..	GND		Ground	21	PS1	I
6	GPIO8	O Camera power type selector		22	PS2	I
8-17…	GND		Ground	23	SHIELD	-
			Flash Enable	24	LED_CTRL	O

*Filter the AVDD28.

**Use a Buffer between module clk out, MON1_CAM and camera clk in, CLK_IN.

***Non-connected.

Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 61 of 79