The ModelSource | Chapter 3: Connecting the Daughterboard |
3
Connecting the Daughterboard
This section describes the Adapter and gives instructions for interconnecting it and the Daughterboard.
Adapter Description
Figure 4 shows a drawing of the Adapter. The items of interest to the user are as follows:
●Connectors that mate with Daughterboard connectors J1–J6
●Ejectors for disconnecting the Daughterboard from the Adapter
●Guide pins that fit the Daughterboard guide pin holes to ensure correct orientation
●Test points for the signals TRIGGER, KEEPALIVE, PLAY, FEEDBACK, SAMPLE, ADJVCC1, +5V, -5V, and GND
November 2001 | Synopsys, Inc. | 19 |