Synopsys 640-pin Generic Device Adapter manual Typographical and Symbol Conventions

Preface The ModelSource 640-pin Adapter

Chapter 2	Provides specifications for building the 640-pin Adapter
Building the Daughterboard	Daughterboard.
Chapter 3	Describes the Adapter and provides a procedure for
Connecting the Daughterboard	connecting it and the Daughterboard.
Chapter 4	Briefly outlines software development tasks and
Developing the Shell Software	provides references.
Chapter 5	Describes mounting the Adapter onto the Modeling
Completing the Model	Systems; labeling the Daughterboard; verifying the
	model; and unmounting the Adapter.
Appendix A	Provides a pinout listing for J1-J6 connectors.
J1–J6 Connector Pinouts

Typographical and Symbol Conventions

●Default UNIX prompt Represented by a percent sign (%).

●User input (text entered by the user)

Shown in bold type, as in the following command line example:

%cd $LMC_HOME/hdl

●System-generated text (prompts, messages, files, reports) Shown as in the following system message:

No Mismatches: 66 Vectors processed: 66 Possible

●Variables for which you supply a specific value

Shown in italic type, as in the following command line example:

%setenv LMC_HOME prod_dir

In this example, you substitute a specific name for prod_dir when you enter the command.

●Command syntax

Choice among alternatives is shown with a vertical bar ( ) as in the following syntax example:

-effort_level low medium high

In this example, you must choose one of the three possibilities: low, medium, or high.

6 Synopsys, Inc. November 2001