Chapter 4: Developing the Shell Software | The ModelSource |
Figure 5 shows part of the template GEN640.PKG file provided by Synopsys.
{*******************************************************************}
{* Copyright | (c) 2001by Synopsys, Incorporated | *} |
{*All rights | reserved. | *} |
{*******************************************************************} {* Logic Model PACKAGE map file for Generic 640 Device Adapter. *} {*******************************************************************}
{ package_map_revision A*} {*******************************************************************} package_mapping
J1A2 | = | J1A2 |
J1A3 | = | J1A3 |
J1A4 | = | J1A4 |
J1A5 | = | J1A5 |
J1A6 | = | J1A6 |
J1A7 | = | J1A7 |
J1A8 | = | J1A8 |
J1A9 | = | J1A9 |
J1A10 | = | J1A10 |
J1A11 | = | J1A11 |
J1A12 | = | J1A12 |
J1A13 | = | J1A13 |
J1A21 | = | J1A21 |
J1A22 | = | J1A22 |
J1A23 | = | J1A23 |
J1A24 | = | J1A24 |
J1A25 | = | J1A25 |
Figure 5: Partial GEN640.PKG File
To customize this file for your DUT, you replace the first name on each line with the name of the appropriate signal on your DUT.
For example, you change the first line
J1A2 = J1A2
to
DUTpname = J1A2
24 | Synopsys, Inc. | November 2001 |